MINUTES
Date: November 13, 2024
Workshop: Installation of Optical Fiber Cables by Blowing into Microtubes – Challenges and Perspectives in
Romania
Location: Bistrița, TeraPlast Industrial Park Sărățel
Participants: 15 people (Annex 1), from:
ANCOM, CFR Telecommunications, Bama Group, AFOR, and 4 of its members: Teledatanet, Camusat, R&M, Datacor,
TeraPlast - event host.
Workshop Agenda:
09:15 – 11:00 Discussions, solution presentations, and updates
11:00 - 11:15 Coffee break
11:15 – 11:30 Factory tour of TeraPlast microtube production section
11:45 - 13:00 Practical testing session in the training area with two optical fiber cable blowing machines
13:00 - 14:00 Lunch and informal discussions
Summary
Mr. General Manager Alexandru Stânean presented the TeraPlast Group and the TeraDuct microtube production
line, which began production in 2021 with the first product tested and introduced to the market in the first
quarter of 2022.
Key Figures about the TeraPlast Group
· Turnover: 883.7 million Lei
· 128 years of tradition
· 16 years on the Bucharest Stock Exchange
· Over 400 million Lei invested in the last 5 years
· 1,123 employees
· Presence in 22 European markets
· Production capacities of 200,991 thousand tons annually
· 14 factories in 4 countries: Romania, Hungary, Moldova, Croatia. The total area of the TeraPlast Group
locations sums up to 363,000 m², of which 113,054 m² are covered production and storage spaces, and 114,600 m²
are exterior storage platforms.
· 45 years of experience in polymer processing
· The only RENAR authorized pipe laboratory in the country
TeraPlast produces a wide range of microducts and microduct bundles with sizes ranging from 4/2.5 mm to
18/14 mm and markets them, including in packages with accessories (connectors and chambers), and can also
include a trace wire in the bundle upon request. At the end of 2023, they established a testing field for
installing and testing optical fiber cables through microducts, as well as classic telecommunications or
electrical cables through monotube, corrugated or PVC ducts. The testing field includes two composite prefabricated chambers
at a distance of 125 m, resulting in a total testing length of 250 m, but by connecting the microducts, it can
reach a length of 5 km.
Microtubes are made of three layers of plastic mass, the inner one having special characteristics that reduce
the friction coefficient of cables during installation. It is the newest testing field in Romania, alongside
those at Prysmian in Slatina, Camusat in Balotesti, and Circet in Dragomiresti-Vale.
There was a discussion about the international development trends of using microtubes, including their use
inside buildings for the physical infrastructure supporting electronic communication installations. Camusat's
experience in FTTH projects for Orange highlights this aspect, using 7/5.5 mm and 4/2.5 mm microtubes, which
has led to a 90% agreement rate from residents compared to 30% with the old solution of cable trays and 32 mm
holes.
The use of microtubes inside buildings brought the discussion to solutions containing pre-connectorized
terminals.
The ANCOM representative mentioned that the technical regulation proposal, indicative RT ITcC, titled
"Telecommunications Installations in Buildings," part of the regulations provided by Law 159/2016, which also
concerns the internal cabling of buildings with optical fiber cables installed in physical infrastructures
(microtubes), is currently under analysis and approval. The provisions of the technical proposal have been
discussed with industry professional associations, including AFOR, and it would be useful to continue
contributing to this regulation to obtain, after approval, a mandatory national standard for the design
and implementation of these types of installations.
A question/challenge was also raised: Could the microtube be used for copper or coaxial cable as well?
The essential importance of microtubes and microtube bundles is for shared infrastructures for optical fiber
networks.
The issue of data and information regarding the existing support networks and physical infrastructures for
optical fiber in Romania was raised so that the database created by ANCOM containing GIS data received from
all operators reporting these data can be validated (Data audit and optical fiber network audit).
The quality of connectivity solutions used in optical fiber networks seems to be increasing in importance
considering the speed upgrade from 1Gbps to 10Gbps, and Camusat shared the experience of a pilot project
using a 1:128 split, which led to a maximum length of 4.5 km and the need to use grade B connectors to stay
within the optical budget available for GPON technology.
In the testing field, a cable was installed by blowing it into a 14/10 microtube over a distance of 520 m
with a Plumettaz blowing machine in approximately 12 minutes, after previously performing the two calibration
tests: the first one with air blowing (continuity) and the second one with cleaning using a sponge.
The cable with 48 optical fibers was then uninstalled using a CBS blowing machine in approximately 10 minutes.
Concrete discussions took place among the participants about the experiences of blowing cables into microtubes.
Conclusions:
AFOR intends to draft a Guide of Best Practices for installing optical fiber cables in microtubes,
based on the experiences and best practices of the participants or from the industry.
The guide will be published on the AFOR page, and it has been proposed to also publish it on the pages of
the workshop participants.
Participants will contribute to the technical regulation proposed by ANCOM regarding telecommunications
installations in buildings.